Great for fixing small mirrors to just about any surface.
15mm wide , 0.8mm thick , 5 metres long
More security for your mirrors is hardly possible. Xtramount® is a double-sided mirror-mounting tape made of closed-cell polyethylene foam (density 100 kg/m³), coated on both sides with a solvent-based, pure acrylate adhesive and protected on one side by brown release paper. Xtramount® was specially developed for vertical mounting of mirrors per DIN EN 1036, but can also be used for many other materials such as metal plates, some plastics, glass or ceramic.
Xtramount® offers you the following advantages:
- Excellent resistance to humidity
- High adhesive strength right from the start
- Suitable for outdoor use
- Temperature resistant from -30° C to +100° C
- Very long storage life
- Excellent resistance to water, plasticisers, oils and solvents
The back of the mirror and the concealed mirror rails must be clean, dry and grease-free. The Xtramount® tape must be applied to the concealed mirror rails without trapping air bubbles and then pressed on firmly. Next, the protective film of the Xtramount® is removed and the concealed mirror rail must be directly pressed onto the back of the mirror firmly (approx. 200N / 20 kg) and evenly, again taking care to avoid bubbles. The maximum load capacity of Xtramount® is achieved 10 hours after having been taped to the mirror. Suitable for mirrors per DIN EN 1036.